AIQS applies all current UK Building Regulations when analyzing your drawings and generating quotes. This page explains how we ensure compliance for every residential project.
Building Regulations are statutory requirements established by the UK government that set minimum standards for the design, construction, and alteration of buildings. These regulations ensure that buildings are safe, accessible, energy-efficient, and sustainable.
The Ministry of Housing, Communities and Local Government publishes guidance documents called "Approved Documents" that provide practical ways to comply with these regulations. All building work covered by the regulations must receive Building Control approval before construction begins.
When you use AIQS to generate a quantity survey, our AI system checks your drawings against these requirements and flags any potential compliance issues. We calculate material quantities based on current regulations and provide risk advice to help you avoid costly mistakes.
The Building Regulations are organized into parts, each covering a specific aspect of construction. Below is how AIQS applies each part to your projects.
Updated to support the UK's net zero carbon targets. New builds must achieve higher energy performance standards, with increased insulation requirements and greater focus on renewable energy integration.
Updated in March 2025 with enhanced requirements for fire safety in residential buildings, including new provisions for sprinklers in certain building types.
Updated in October 2024 with stricter water efficiency standards to address water scarcity concerns.
AIQS is continuously updated to reflect these changes, ensuring that your quotes always comply with the latest regulations.
When you use AIQS to generate a quantity survey, our AI system performs an initial compliance check against these regulations. However, formal Building Control approval is still required before you begin construction.
Two routes to approval:
AIQS provides accurate material quantities and flags potential compliance issues, but it does not replace the need for formal Building Control approval or professional design certification where required.